Home| All Programs| Today added Progs| Download Status| Customers opinion| Helpdesk| Shopping cart

Program Search:

Shopping Cart:




*Note: Minimum order cost: €20
Maximum Total Price: €1500
We Recommend:
Siemens Solid Edge 2020 Build 220.00.00.104 €40 buy download

× Siemens Solid Edge 2020 Build 220.00.00.104 Close
Siemens Solid Edge 2020 Build 220.00.00.104 | 8.66 Gb
Solid Edge is a portfolio of affordable, easy-to-use software tools that address all aspects of the product development process. Solid Edge combines the speed and simplicity of direct modeling with the flexibility and control of parametric design - made possible with synchronous technology.

Additional Information

Support for High-resolution Monitors

Solid Edge 2020 has improved support for bitmaps, controls, and other graphic elements displayed on high-resolution monitors (monitors with resolution greater than 3500 pixels).

When you use a monitor with DPI greater than 170 pixels, we recommend you adjust settings in two locations:

Set the primary DPI scaling resolution for the entire desktop using the Microsoft Windows Control Panel.

Adjust the relative sizing of Solid Edge design tools on the Helpers tab in the Solid Edge Options dialog box.

Temp File Space

Solid Edge uses temporary file space to save files and to store memory mapped display files. Using temporary file space increases system performance and is more robust should you encounter network problems.

You should ensure that you have twice as much free temporary file space as the size of the largest file being saved. The file size includes the size of the assembly, the size of the subassemblies that are being used, and the size of the part files.

Running Solid Edge creates temporary memory mapped files that are used to support the display system. When you open assembly and part files, memory mapped files are created in the temp directory on the hard drive only while the files are displayed. The memory mapped files are deleted after exiting the Solid Edge file.

Running Solid Edge creates a file named DCCACHE.tmp in the user temp folder. This file is a cache of the file icons displayed on the dialogs for browsing, opening, and saving files.

If Solid Edge files are not properly associated with the product, try deleting this file and restarting the product.

It is good practice to periodically delete files in temporary folders so your system is not unnecessarily using disk space.

Page File Size
For optimum Solid Edge performance, we recommend you set a custom page file size. The Initial size and the Maximum size should be the same. They should both be set to double the RAM size.

Solid Edge Maintenance Packs
We release Maintenance Packs for CRITICAL items only. Solid Edge 2020 maintenance packs will be released through December 31, 2020.
What's New in Solid Edge 2020

As the Solid Edge portfolio continues to expand, this release's version is updated to include many new features, all of which continue the focus on implementing state-of-the-art technology with outstanding usability.

For a complete list of Solid Edge 2020 enhancements, start Solid Edge and launch Solid Edge Help and review What's New in Solid Edge 2020. You can also review the Solid Edge 2020 Release Notes available on the Support Web Page: http://support.industrysoftware.automation.siemens.com/docs/se/.


About Siemens PLM Software. Siemens PLM Software is a world-leading provider of product lifecycle management and manufacturing operations management software. We help thousands of companies realize innovation by optimizing their processes, from planning and development through manufacturing, production and support.

Operating system requirements and information

Solid Edge 2020 has been certified to run on the following:

Windows 10 Enterprise or Professional (64-bit only) version 1709 or later
Internet Explorer 11
Internet Explorer is not required to be the default browser.
Microsoft Office Professional 2016, or Microsoft Office 365 Business.

Note

Windows Home and Windows RT are not supported.

We recommend that you not run Solid Edge on Server operating systems.

Solid Edge stops certifying new releases against an operating system shortly after Microsoft drops mainstream support for it. Microsoft dropped mainstream support for Windows 7 in January 2015. Microsoft dropped mainstream support for Windows 8.1 in January 2018. Due to limited support from Microsoft and graphics card vendors for older operating systems, installation of Solid Edge on Windows 7 or Windows 8.1 is not recommended. Solid Edge will install and run on these operating systems, but issues determined to be caused by an incompatibility between Solid Edge and an end of life operating system may not be fixed. Due to the potential for critical issues on these older operating systems, Solid Edge 2020 could be the last Solid Edge release that installs on Windows 7 or Windows 8.1.

Recommended system configuration

Windows 10 Enterprise or Professional (64-bit only) version 1709 or later
16 GB RAM or more
True Color (32-bit) or 16 million colors (24-bit)
Screen Resolution: 1920 x 1080

Attention! Solid Edge 2020 uses SPLM License Server v10.0.0 for licensing products
Therefore, you need to install a universal SolidSQUAD License Servers (if it wasn't installed before) or upgrade it to the SolidSQUAD'License'Servers'SiemensPLM folder (if it was installed for some Siemens products from TeAM releases SolidSQUAD-SS until July 24, 2019)
The updated vendor and license from this release are compatible with all previous siemens releases from TeAM SolidSQUAD-SS. So, after the solidSQUAD'License'Servers'SiemensPLM update from this release, previously installed Siemens products from TeAM SolidSQUAD-SS releases will continue to operate without any restrictions

Cm. For more information, there's more information.

Product: Siemens Solid Edge
Version: 2020 build 220.00.00.104
Supported Architectures: x64
Website Home Page : www.plm.automation.siemens.com
Language: Multilingual
System Requirements: PC

Visit All Darkness-+ News

No more mirror please!



Download File Size:8.63 GB


Siemens Solid Edge 2020 Build 220.00.00.104
€40
Customers who bought this program also bought:
  • Kubotek KeyCreator 13.5.0 x64 €20
  • SolidCAM 2020 SP1 €50
  • Autodesk AutoCAD 2020 (1 dvd) €100
  • Vectric Aspire 9.510 €40
  • NCSIMUL Solutions 2018 R2.2 €30
  • Rhinoceros 6.8.18240.20051 €40
  • GibbsCAM v12.0.27.0 x64 Multilingual €60
  • OPEN MIND Technologies hyperMILL 2018.1 x64 €30
  • VoluMill Siemens NX CAM 2018 version 8.5 x64 €25
  • MecSoft RhinoCAM 2018 version 8.0.309 x64 €25
  • Vero EdgeCAM 2020.0 €45
  • Autodesk HSMWorks 2020 Ultimate Multilanguage ISO (1 dvd) €50
  • Mastercam Products 2020 €75
  • CAMWorks 2020 SP1 Build 2020.03.16 €30
  • CGTech VERICUT 9.0.1 €30
  • Altium Designer 20.0.11 Build 256 (x64) €60
  • Siemens Simatic TIA Portal V16 €45
  • SolidWorks 2020 SP0.1 Premium (1 dvd) €110
  • Missler TopSolid 2019 SP5 7.13.300.109 with Textures Library Multilingual €40
  • Siemens Solid Edge 2020 Technical Publications €10
  • Cimatron 14 SP5 with Tutorials €45
  • DP Technology ESPRIT 2019.1 €40
  • SprutCAM 9.0 x32 x64 €40
  • Cadence Allegro and OrCAD 17.20.000-2016 HF028 x64 €80
  • BobCAD-CAM 2017 V30 x64 €40
  • ABB Robot Studio 5.07.01 €35
  • OneCNC 4.22 €25
  • Robotics and Mechatronics Collection PDF CHM eBooks €20
  • DelCAM Powershape 8 (1 dvd) €50
  • Delcam PowerMILL Pro PM7006 CB1084537 SP5 DVD Multilanguage (1 cd) €60

  • Home| All Programs| Today added Progs| Download Status| Customers opinion| Helpdesk| Shopping cart      
    Copyright 2006-2020 ©   LPStore   All Rights Reserved





    9327 Fantasy & Sci-Fi eBooks Collection 9327 PDF Books eBook €60


    Cambridge University History Collection PDF eBooks €100

                       





    Autodesk AutoCAD 2020 (1 dvd) €100

                 

    SolidWorks 2020 SP2.0 Full Premium (1 dvd) €110






    Autodesk 3ds Max 2021 €70

                 

    Autodesk Inventor Professional 2020 (1 dvd) €90